2CV / Dyane Mirror Arm, Original Geco
Original Geco Arms (see notes)
2CV, Dyane, AZU, AK
138 item available items available
Warning: Last items in stock!
As far as we know, nobody else anywhere supplies the range of mirror arms for the original Geco mirrors fitted to 2CVs, Dyanes, etc.
Having bought a quantity of NOS (new, old stock) components from the end of Geco's production of replacement 2CV mirrors, we can now offer original Geco arms.
Please note that on later production, although stainless steel was used instead of the chromed mild steel of the earlier production, the earlier arms were of better quality. However, also please note:.....
Important note: Unlike many of the later production 2cv mirror arms, these have been produced with the bend in the correct place and of sufficient angle to enable full adjustment of the mirror and still give clearance for the passenger side window to be opened/closed!
Please use the drop-down menu above to select the type of mirror arm(s) that you require.
In addition to these arms, we have also had the 26cm long straight (Acadiane-type) arms made, using higher quality stainless steel than the originals (click here).
PLEASE NOTE: Other parts may be needed:
The fixing point at the back of the mirror head is usually corroded and seized and often breaks when attempting to undo it. (Click here for swivel parts). If you already have a MirrorCool silicone surround trim on your mirror, the glass and trim can be removed and re-fitted in order to fit a new swivel kit and arm. However, if you still have the original hard plastic surround, you will need to replace it (Click here for MirrorCool silicone trim kit).